DeWalt DW071 Manual De Instrucciones página 12

Láser rotativo para trabajo pesado
Ocultar thumbs Ver también para DW071:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Compare the vertical position of the center of each laser beam. The
centers should be within 3/32" (vertically) of each other.
• If the centers of the two beams differ by more than 3/32" (vertically),
then have your Rotary Laser calibrated at a D
center.
PLUMB ERROR CHECK
• Set up a tripod about 25' from a vertical surface.
• Mount your Rotary Laser on the tripod.
• Following the procedure in the "Two Position Pivoting Head" section
of this manual, set the Rotary Laser head in the plumb position.
• Hang a plumb bob on the surface.
• Level the laser, following instructions in the "Vertical Plumbing" sec-
tion of this manual.
• Turn the unit on so that the lasers are on and rotating.
• Rotate the laser on the tripod so that the beam is in the line with
the plumb bob.
• Ensure that the laser is still level.
• If the beam lies along the same line as the plumb bob, then the cal-
ibration is acceptable.
• If the beam does not lie along the same line as the plumb bob,
have your Rotary Laser calibrated at a D
Accessories
Recommended accessories for use with your tool are available for
purchase at your local service center.
CAUTION: The use of any non-recommended accessory may be
hazardous.
If you need any assistance in locating any accessory, please contact
D
WALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD
E
21286 or call 1-800-4-D
WALT. (1-800-433-9258) See our catalog on
E
the World Wide Web at www.dewalt.com.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments should be performed by certified service centers or
WALT service
E
other qualified service organizations, always using identical replace-
ment parts.
Three Year Limited Warranty
D
als or workmanship for three years from the date of purchase. This
warranty does not cover part failure due to normal wear or tool abuse.
For further detail of warranty coverage and warranty repair informa-
tion, visit www.dewalt.com or call 1-800-4-D
This warranty does not apply to accessories or damage caused where
repairs have been made or attempted by others. This warranty gives
you specific legal rights and you may have other rights which vary in
certain states or provinces.
In addition to the warranty, D
D
mal use, for free, any time during the first year after purchase.
If you are not completely satisfied with the performance of your
WALT service center.
E
D
it within 90 days from the date of purchase with a receipt for a full
refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products sold in
Latin America. For products sold in Latin America, see country specif-
ic warranty information contained either in the packaging, call the local
company or see website for warranty information.
10
WALT will repair, without charge, any defects due to faulty materi-
E
WALT tools are covered by our:
E
1 YEAR FREE SERVICE
WALT will maintain the tool and replace worn parts caused by nor-
E
90 DAY MONEY BACK GUARANTEE
WALT Power Tool, Laser, or Nailer for any reason, you can return
E
WALT (1-800-433-9258).
E

Publicidad

Tabla de contenido
loading

Tabla de contenido