Optional Equipment; Transport, Installation - HSM Profi Pack P425 Instrucciones De Servicio

KHD Handels-GmbH - www.khd-kl.com - www.khd-handel.de - Fon +49 (0) 631 570 46 80 - Autorisierter HSM-Direkthändler
english
4 Operating and display panel
1 1
2 2
3

Optional equipment:

The HSM Profi pack 425 can also be supplied with a built-in dust collector.
Accruing dust can be removed with a dust extractor when processing the boxes. There is a
connection for the dust extractor on the right-hand side if your device has the dust collector.
If your device does not have this apparatus, you can fi t the components later when needed.
Profi Pack conversion kit:
Dust extractor:
5

Transport, installation

WARNING
• Always transport the machine on a pallet. Lash down the machine and pallet with
strapping tape.
• Transportation (e.g. pallet truck) must be appropriately dimensioned for the machine
weight of 186 kg.
• Pay attention to the high centre of gravity of the machine during transport.
• The machine may only be placed in dry rooms, on a solid, level surface (not on carpet).
The fl oor load on each castor is approximately 62 kg.
Transport control
Check the machine for transport damage when unloading. In the event of transport damage, inform
HSM and the forwarding company immediately.
12
5
4
Order number x.xxx.xxx.xxx
Order number 2.412.111
1 Forward button
2 Stop button
3 Reverse button
4 "Ready for operation" display
5 "Fault" display
Profi pack P 425
02/2020