HSM Profi Pack P425 Instrucciones De Servicio página 13

Ocultar thumbs Ver también para Profi Pack P425:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
KHD Handels-GmbH - www.khd-kl.com - www.khd-handel.de - Fon +49 (0) 631 570 46 80 - Autorisierter HSM-Direkthändler
WARNING
Dangerous mains voltage!
Improper handling of the machine can lead to an electric shock.
• Before you insert the power plug, make sure that the voltage and frequency of your power
supply comply with the information on the name plate.
• Make sure that the power plug is easily accessible.
• Make sure that the power cable is unobstructed and that nobody can tread on it.
 Insert the plug of the machine into a properly installed socket.
 Lock the front rollers by pressing down the brake lever.
6 Operation
Adjusting the cardboard width
Cardboard is processed up to a width of 425 mm. Set the required width using the limit stop.
Cardboard that is wider is cut off automatically.
 Push the lever upwards and move the limit stop.
 Push the lever downwards to lock the limit stop.
Switching on the machine
Unlock the emergency stop button by turning it anti-clockwise.
Turn the main switch to position "I".
The machine is ready to operate.
 Press the "Forwards button". The cutting unit starts.
 Pressing the stop button switches off the cutting unit.
Feeding the cardboard
425 mm
02/2020
Place the cardboard against the limit stop on the right
and push the it into the infeed opening until the cutting
unit grips the cardboard. Let go of the cardboard
immediately. The perforated cardboard emerges from
the shaft.
Profi pack P 425
english
13

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido