Intended Use - Hilti SID 14­A Manual De Instrucciones

for the type of dust generated. Ensure that the workplace is well ventilated. Follow national
requirements for the materials you want to work with.
▶ The user and any other persons in the vicinity must wear suitable eye protection, a hard hat, ear
protection, protective gloves and breathing protection while the power tool is in use.
Use and care of electric tools
▶ Secure the workpiece. Use clamps or a vice to hold the workpiece in position. The workpiece is
thus held more securely than by hand and both hands remain free to operate the power tool.
▶ Check that accessory tools are compatible with the power tool's chuck/drive system and that they
are fitted and secured correctly.
▶ Make sure that the screws or bolts and the workpiece are suitable for the level of torque generated
by the power tool. Excessive torque may overstress, stretch or strip the screws/bolts or damage the
workpiece, thus leading to hazardous situations.
Use and care of battery-powered devices
▶ Check that the tool is switched off before inserting the battery. Inserting a battery into an electric
tool that is switched on can lead to accidents.
▶ Do not expose batteries to high temperatures and keep them away from fire. There is a risk of
explosion.
▶ Do not disassemble, squash or incinerate batteries and do not subject them to temperatures over
80°C. This presents a risk of fire, explosion or injury through contact with caustic substances.
▶ Avoid ingress of moisture. Ingress of moisture may cause a short circuit, resulting in burning injuries or
fire.
▶ Remove the battery before storing or transporting the power tool.
▶ Avoid short circuiting the battery terminals. Check that the battery terminals and the terminals in
the power tool are free from foreign objects before inserting the battery in the tool. Short circuiting
the battery terminals presents a risk of fire, explosion and chemical burns.
▶ Do not continue to use or attempt to charge damaged batteries (e.g. batteries with cracks, broken
parts, bent or pushed-in/pulled-out contacts).
▶ If the battery is too hot to touch it may be defective. In this case, place the power tool in a non-
flammable location, well away from flammable materials, where it can be kept under observation
and allowed to cool down. Contact HiltiService after the battery has cooled down.
Electrical safety
▶ Before beginning work, check the working area (e.g. using a metal detector) to ensure that no
concealed electric cables or gas and water pipes are present. External metal parts of the power tool
may become live, for example, when an electric cable is damaged accidentally. This presents a serious
risk of electric shock.
3 Description
3.1 Overview of the product
Hex. socket (SID)
@
Illumination
;
Forward/reverse selector switch with safety
=
lock
Control switch (with electronic speed
%
control)

3.2 Intended use

The product described is a hand-held, cordless impact screwdriver/wrench for driving and removing screws
or tightening and releasing threaded nuts and bolts in wood, metal, masonry and concrete.
Hilti products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be informed of any particular hazards that may be
encountered. The impact screwdriver/wrench and its ancillary equipment may present hazards when used
incorrectly by untrained personnel or when used not as directed.
▶ Do not use the battery as a power source for other unspecified appliances.
▶ Observe the national health and safety requirements.
▶ To reduce the risk of injury, use only genuine Hilti tools and accessories.
Printed: 16.06.2015 | Doc-Nr: PUB / 5071661 / 000 / 03
1
&
(
)
+
§
/
Square drive (SIW)
Torque selector button
Belt hook (optional)
Battery charge status display
Release buttons (B22/... battery)
Release button (B14/... battery)
17