Hilti SID 14­A Manual De Instrucciones página 28

CAUTION
Risk of injury. The accessory tool may be hot or have sharp edges.
▶ Wear protective gloves when using the power tool and when changing accessory tools.
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Pull the accessory tool off the square drive.
5.7 Setting the torque
Technical data
Model SID ... (SID 14­A OR SID 22­A) → Seite 19
Model SIW ... (SIW 14­A OR SIW 22­A) → Seite 20
▶ Press the torque selector button as many times as necessary until the desired torque setting is indicated
to the left of the button.
SID 14­A
SID 22­A
Model SID ... (SID 14­A OR SID 22­A) → Seite 19
SIW 14­A
SIW 22­A
Model SIW ... (SIW 14­A OR SIW 22­A) → Seite 20
5.8 Setting forward or reverse rotation
Note
An interlock prevents switching while the motor is running.
The control switch is locked when the forward/reverse switch is in the middle position (safety lock).
▶ Set the forward/reverse switch to the desired direction of rotation.
5.9 Screwdriving
WARNING
Risk of injury and damage. Screws/bolts or the workpiece may be damaged by excessively high
torque; this may also lead to serious injury.
▶ Ensure fastener and attachment will withstand the level of torque generated by the tool.
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Use the torque selector button to set the desired torque. → Seite 22
5.10 Switching on
▶ Press the control switch.
◁ Speed of rotation is regulated by the distance the control switch is pressed in.
5.11 Switching off
▶ Release the control switch.
5.12 Removing the battery
▶ Remove the battery.
22
Printed: 16.06.2015 | Doc-Nr: PUB / 5071661 / 000 / 03
8
9
10