Fault Finding; Warranty Certificate - Erreka KM 600S Manual De Instrucciones

Accionadores para portas de correr
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

FAULT FINDING

1.- The motor does not operate:
1.1. Check that the installation is correctly connected (Fig. 2)
1.2. Check that voltage is reaching the motor. (230 V AC)
2.- The motor operates in a single direction:
2.1. Check that the standard motor is correctly connected (Fig. 2)
2.2. Check that the condenser is connected.
3.- The motor lacks power:
3.1. Unblock the motor and check whether the door shows excessive resistance in its run. If so, disassemble the motor and
eliminate the resistance until the door can be easily moved by hand.
3.2. Check whether the condenser has been connected and if its capacity is the correct one (see motor label)
3.3. Check whether the motor is blocked. If it is not, block it.
4.- The door does not reach the end of its run:
Check whether the opening and closing times are the correct ones for the size of the door.
If after having made all the checks and adjustments indicated the fault persists, contact your nearest
ERREKA dealer or technical service commenting the fault observed in as much detail as possible.
INSTALLATION OF THE AUTOMATIC MECHANISM
The models referred to in this manual comply with the European reference directive:
- Machine directive 89/392/EEC.
- Low voltage regulation 73/233/EEC.
- Electromagnetic compatibility 89/336/EEC
It is recommended that the automatic mechanism should be installed by professionally qualified personnel, respecting the legal
regulations corresponding to the place of installation.

WARRANTY CERTIFICATE

Automatismos Erreka guarantees this equipment for a period of 24 months as from the date of supply.
This guarantee is applicable to any manufacturing defect.
It is the responsibility of the fitter to transfer the equipment to the authorised technical services.
This guarantee does not include:
- Damage caused by incorrect installation or use of the equipment.
- Damage caused by handling by unauthorised personnel.
- Damage caused by external or atmospheric agents (lightning, floods, etc)
23

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Km 1000s

Tabla de contenido