Commissioning, Operation - WIKA LSO.02 Manual De Instrucciones

6. Commissioning, operation

6. Commissioning, operation
When unpacking the mini limit switch check all items for external damage. A functional
test may be carried out prior to the installation. To do this, the device should be temporarily
connected and the sensor-tip immersed in and then withdrawn from a glass of water.
WARNING!
The electrical connection must only be carried out by qualified skilled
personnel. Observe the relevant VDE regulations.
6.1. Installation instructions
horizontal installation
tank or pipe wall
rubber or metal seal
welded adapter
inclined installation
WIKA operating instructions mini limit switch, model LSO.02
vertical installation
ATTENTION!
In the case of
electropolished pipes
min. distance can be
much larger than 10 mm.
high-temperature medium
long adapter
Insulation
GB
11