Cleaning And Storage - Clatronic BS 1249 Instrucciones De Servicio

Important note!
• Cleaning may become necessary after a shorter time, depending on the condi-
tions of use, e.g. when vacuuming fi ne dust.
• If the suction power of your vacuum cleaner diminishes please clean the fi lters
as described.
• If the suction power suddenly diminishes during operation this may be due to
the fi lters being locked.
Cleaning
• Pull the plug out of the socket before cleaning!
• Clean the casing with a dry cloth.
• Clean the motor protection fi lter approximately every 3. time the vacuum clea-
ner is emptied. Clean the fi lter in hot water without additives. Put it back into
place only once it is completely dry.
Storage
• Let the iron cool down completely.
• Wind the cable completely.
• Please position the device horizontally and insert the hook on the telescopic
tube into the parking aid (11) on the back of the device.
05-BS 1249 65
3. Outlet fi lter
The appliance is also equipped with an outlet fi lter.
In order to ensure that the fi lter works correctly, we
recommend that you replace it every six months.
It is located on the rear part of your appliance be-
hind a ventilation grid. Open the ventilation grille
by pressing the lever on its side. Then pull the
grille out towards the front. Remove the fi lter and
clean as described above. Fit the fi lter back into
place and close the ventilation grid by following
the steps above in the opposite order.

Cleaning and storage

GB
65
15.08.2005, 8:59:15 Uhr