Power Cord; Power Amp (Sold Separately); Speaker Leads; Rear Panel - Pioneer DMH-G225BT Guia De Inicio Rapido

• The graphical symbol placed on
the product means direct current.
Notice for the blue/
white lead
• When the ignition switch is turned on
(ACC ON), a control signal is output
through the blue/white lead. Connect to
an external power amp's system remote
control terminal, the auto-aerial relay
control terminal, or the aerial booster
power control terminal (max. 300 mA 12
V DC). The control signal is output
through the blue/white lead, even if the
audio source is switched off.

Rear panel

This product
Aerial jack
Wired remote input
Connect to steering wheel control
interface of your vehicle. For more
details, consult your dealer.
Power supply
Fuse (10 A)
Front output
Rear/Subwoofer output

Power cord

To power supply
Power cord
Yellow
To terminal supplied with power
regardless of ignition switch position.
Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF
Orange/white
To lighting switch terminal.
Black (earth)
To vehicle (metal) body.
Violet/white
Of the two lead wires connected to the
back lamp, connect the one in which
the voltage changes when the gear shift
is in the REVERSE (R) position. This
connection enables the unit to sense
whether the car is moving forwards or
backwards.
Blue/white
Connect to system control terminal of
the power amp (max. 300 mA 12 V DC).
Light green
Used to detect the ON/OFF status of the
handbrake. This lead must be
connected to the power supply side of
the handbrake switch.
Power supply side
Handbrake switch
Earth side

Speaker leads

To power supply
Power cord
Left
Right
Front speaker
Rear speaker
White
White/black
Grey
Grey/black
Green
Green/black
Violet
Violet/black
NOTE
With a two-speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Power amp (sold
separately)
Without internal amp
Important
The speaker leads are not used when this
connection is in use.
With internal amp
Important
Front speaker and Rear speaker are output
from the speaker leads when this
connection is in use.
System remote control
Connect to Blue/white cable.

Power amp (sold separately)

Connect with RCA cable (sold
separately)
To Rear or subwoofer output
Rear speaker or subwoofer
To Front output
Front speaker
Subwoofer
En
7