koban KMD 50000 Manual De Instrucciones página 122

True RMS
Digital Multimeter User Manual
5-11. DC Current Measurements
CAUTION: Do not make 20A current measurements for longer than 30
seconds.
Exceeding 30 seconds may cause damage to the meter and/or
the test leads.
1 .Insert the black test lead banana plug into the
negative COM jack.
2. For current measurements up to 5000ÿA DC,
set the function switch to the yellow pA position
and insert the red test lead banana plug into the
/uA/mA
jack.
3. For
current measurements up
to500mA DC,
set the function switch to the yellow mA position
and insert the red test lead banana plug into the
ji/A/mA jack.
4. For current measurements up
to
10A
DC, set
the function switch
to
the yellow 1 0A position
and insert the red
test
lead banana plug into the
1 0A jack.
5. Press the MODE button to Indicate "DC"
on the
display.
6. Read the current in the display.
Mililfl
ZA
M
V
%
f
\
+
CVVHI|I|H-I