Daewoo DTC-315 Manual De Instrucciones página 11

ENG
Date setting
On hook status, press SET/ST/÷ key, the current LCD displays "SET 1 DATE", press SET/ST/÷ key
to confirm. Enter the date / time settings, year display blinks, press the UP/ - , DOWN/+ key to
change, and then press SET/ST/÷ key to enter the month setting, similarly set the year, press
SET/ST/÷ keys to modify the day, hour and minute in order.
5-digit local code setting
On hook status, press SET/ST/÷ key, the current LCD display "SET 1 DATE", press UP/ -, DOWN/+
keys to change the LCD prompts "SET 2 CODE", then press the SET/ST/÷ key to confirm, LCD will
show "CODE ----", enter the area code is set, the first "-" flashes (if set area code, the display setting
area code, area code the first number flashing ). Press UP/ - , DOWN/+ keys to set or modify 0-9,
press SET/ST/÷ key to enter the second set, and so on.
1-digit out code setting
On hook status, press SET/ST/÷ key, the current LCD display "SET 1 DATE", press UP/ -, DOWN/+
keys to change the LCD prompts "SET 3 PCODE", press SET/ST/÷ key to confirm, LCD will show
"PCODE-", "-" Flashes (if set out local code, the display has been set out code) Press UP/ -, DOWN/+
key, it can be set 0-9, after finished press SET/ST/÷ key to confirm (After setting out code in
callback calls, when pre-dial, if the number is greater than equal to 6 and the first and outgoing
code is different, the phone will automatically add the digit or digits. The Callback Outgoing not
consider adding the digit or digits.)
Flash time setting
On hook status, press SET/ST/÷ key, the current LCD display "SET 1 DATE", press UP/ -, DOWN/+
keys to change the LCD prompts "SET 6 FLASH", press SET/ST/÷ button to confirm, display "FLASH
4 1000", a total of four groups, press UP/ -, DOWN/+ sure to select one group, the corresponding
keys correspond FLASH (can be set respectively 110MS 300 MS 600MS 1000MS).
LCD brightness contrast adjustment
On hook operation, press FLASH key, LCD displays " LCD 3 ", Continuously press the [FLASH] key
to adjust the LCD contrast, is divided into 5 levels, (LCD default contrast 3).
BACK key
On hook status, press UP/ - , DOWN/+ or OUT/X to enter into incoming /outgoing query the
status, LCD display the caller's number, the date and time information. After checking of the
incoming / outgoing number, press BACK key, the incoming / outgoing numbers can be called
back.
Check incoming calls
On hook status, press UP/- or DOWN/+ key to check incoming calls. To re-dial the number
checked, press BACK key.
Check outgoing calls
On hook status, press OUT/ X key to cycle check the outgoing calls' numbers and time. To re-dial
the number checked, press BACK key.
11