Call Transfer - Daewoo DTC-315 Manual De Instrucciones

ENG
Pre- dial function
On hook status, press the desired number, if there is some wrong number, press DEL key to
modify.
After all the input is completed, press BACK key or REDIAL key to dial out.
DEL key
Press DEL key can exit the operation system.
In pre-dialing mode, press DEL key to delete or modify some wrong number. In checking
incoming/outgoing calls mode, press DEL key to delete the number displays on the LCD. Press
DEL key for 3 seconds to delete all of the incoming or outgoing calls.
Store VIP number
VIP calls, check the caller ID when you hang up, press VIP key, you can add or remove the VIP
status of the corresponding number.
If the call memory is full, and there are new calls, the phone will choose to remove the non-VIP
numbers.
One touch memory
Storage: On hook status or in pre-dial mode, enter a number or checking incoming / outgoing
calls, press SET/ST/÷ key, then press Mi (i = 1 ~ 10)
Dialing: Off-hook followed by Mi (i = 1 ~ 10) or hang up after pressing Mi (i = 1 ~ 10) and press
BACK or REDIAL key, you can dial the number.
CAL key
Press the CAL key to enter into the calculate mode, the LCD will display " CA0 " , it meant you
can calculate now, LCD can display 10 figures for you to calculate, you can calculate with + - x ÷ ;
On calculate state, press OUT /x as the multiply by, press the BACK /÷ key as the divided by and
the */. key as the decimal point, press the CAL key for deleting the calculate operation. Press the
DOWN /+ key as the ADD key, press the UP/- key as the reduce key.

CALL TRANSFER

To transfer a call during a conversation to another phone number, press R/FLASH key and dial
the desired destination number. When you hear the tone signal return the handset to the base
to finish the call.
OFF-HOOK OPERATION
MUTE key
Pick up the handset on the conversation status, if you don't want that the caller hear your talking
with other party, you can press MUTE key and the caller will hear nothing. At the same time, if
you want to talk with the caller again, press MUTE key again, the system automatically enter the
handset conversation state.
12