Function Setting - Daewoo DTC-315 Manual De Instrucciones

LCD Descriptions
IN: "IN" will be displayed on LCD when Checking incoming calls
OUT: "OUT" will be displayed on LCD, when Checking outgoing calls.
NEW: "NEW" will be displayed on LCD When a new call is received.
REP: "REP" will be displayed on LCD, when repeat call is received from the same number, In such
a case date/ time of last call will be displayed.
MUTE: Press MUTE button, MUTE symbol will display on the LCD.
VIP: VIP will be displayed on LCD when the number was set as VIP number.
Main Features:
FSK/DTMF caller ID compatible.
l
LCD with 16 digits display.
l
61 groups, 8 digit of incoming call memory.
l
16 groups, 8 digit of outgoing call memory.
l
10 one touch memory.
l
Programmable Flash (Default 300ms).
l
Mute function.
l
LCD with date, real time and week display.
l
5 level LCD contrast adjustable (default level 3).
l
Pulse and Tone dialing (software default Tone dialing).
l
Calculator function.
l
5-digit local code number setting.
l

Function setting

Dial-up mode setting
In On hook Mode, press the * key for three seconds to switch between TONE / PULSE (default is
TONE).
Menu function setting
On hook status, press SET/ST/ ÷ key to enter setting mode, now the LCD displays "SET 1 DATE",
Press number key or UP/- key or DOWN/+ key to select the setting item, the LCD will display the
relevant setting item. After finishing the setting, press SET/ST/÷ key to enter the next setting. All
settings are made by UP/- , DOWN/+ keys to change the specific settings, use the DEL key to exit
the setting.
ENG
10