Metabo C 7WDM Manual De Instrucciones página 18

English
(11) Be sure the arbor lock button is released so the blade turns freely.
NOTE
:
* Be sure the arbor lock button returns to release position after releasing
the button.
* Be sure that the blade is securely and correctly fi xed.
Dismounting the blade (Fig. 11-a, Fig. 11-b and Fig. 11-c)
(1) Unplug the saw from the outlet.
(2) Place the provided blade wrench over the arbor bolt.
(3) Press the arbor lock button, holding it in fi rmly while turning the blade wrench. This
will engage the arbor lock allowing the arbor bolt to be loosened with the blade
wrench. Continue to hold the arbor lock button while turning the wrench clockwise
to loosen the arbor bolt.
(4) Use the lower blade guard lifting lever to raise the lower blade guard.
(5) Remove the arbor bolt, the outer blade collar, and the blade. Do not remove the
inner blade collar.
NOTE
: Pay attention to the pieces removed, noting their position and
direction they face. Wipe the blade collars clean of any sawdust before
installing a new blade.
Lower blade guard
lifting lever
Arbor bolt
18
Lower blade guard
Fig. 11-a
Arbor lock
button
Fig. 11-b