Use Proper Extension Cord - Metabo C 7WDM Manual De Instrucciones

English

USE PROPER EXTENSION CORD

Make sure your extension cord is in good condition. Use only 3-conductor type extension cords
that have 3-prong grounding plugs and 3-pole receptacles that accept the tool's plug. When using
an extension cord, be sure to use one heavy enough to carry the current your product will draw.
An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
Table shows the correct size to use depending on cord length and nameplate ampere rating. If in
doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.
Ampere Rating
More Not More
Than Than
0 – 6
6 – 10
10 – 12
12 – 16
WARNING:
To avoid electrical shock hazard, never use this tool with a damaged
or frayed electrical cord or extension cord.
Inspect all electrical cords regularly. Never use in or near water or in
any environment where electric shock is possible.
SAVE THESE INSTRUCTIONS
MAKE THEM AVAILABLE TO
12
MINIMUM GAGE FOR CORD SETS
0 – 25
(0 – 7.6)
18
18
16
14
OTHER USERS
OWNERS OF THIS TOOL!
Total Length of Cord in Feet (Meter)
26 – 50
(7.9 – 15.2)
AWG
16
16
16
12
AND
AND
51 – 100 101 – 150
(15.5 – 30.5) (30.8 – 45.7)
16
14
14
Not Recommended
14
12
12