Metabo C 7WDM Manual De Instrucciones página 21

Fig. 14
6. Confi rm the position of the arbor lock button before using the tool.
After installing the saw blade, confi rm that the arbor lock button has been returned to the
released position before using the power tool (see Fig. 11-b).
7. Confi rm the tool's power cord is not damaged.
WARNING:
8. Extension cord
When the work area is far away from the power source, use an extension cord of suffi cient
thickness and rated capacity. The extension cord should be kept as short as practicable.
WARNING:
9. Check the Power Receptacle.
To prevent overheating, accidental stopping or intermittent operation, confi rm that the
power cord plug fi ts properly in the electrical receptacle and does not fall out after it is
inserted. Repair or replace the receptacle if it is faulty.
10. Eye protection
Always wear eye protection with side shields that meets the requirements of ANSI Standard
Z87.1. Ordinary eyeglasses do not provide adequate protection because they do not contain
impact resistant safety glass.
WARNING
11. Confi rming condition of the environment:
Confi rm that the work site is placed under appropriate conditions conforming to prescribed
precautions.
Lower blade guard
Repair or replace the power cord if an inspection indicates that it
is damaged.
Repair or replace the extension cord if an inspection indicates
that it is damaged.
: Operating the tool without wearing proper eye protection may
result in serious injury.
The lower guard serves to protect your body from
coming into contact with the saw blade. Make
absolutely certain that the cover smoothly performs to
cover the saw blade.
English
21