Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT INFORMATION
Please read the following instructions
carefully before installing the product.
WARNING
1. only suitable if the approved vehicle has been
fitted with three-point safety belts that meet ECE
standard nº 16 or equivalent.
2. This child seat must be used with the harness
system for children weighing between 9 kg and
18 kg.
3. This child seat may be used without the harness
system for children weighing between 15 kg and
36 kg.
4. Please read the instructions carefully, as incorrect
installation could result in serious injury. if any
injuries should occur as a result of incorrect
installation, the manufacturer will accept no
liability.
5. This is an iSoFiX CHiLD RESTRAinT SYSTEM. it
has been certified under European regulation ECE
R44/04 for general use in vehicles fitted with
iSoFiX anchorage systems.
6. it may only be fitted in vehicles with certified
iSoFiX anchorage systems (as indicated in the
owner manual for the vehicle), depending on the
category of the child seat and the device.
36
7. The iSoFiX weight group and size class for which
the device has been designed are: Group 1, for
children between 9 and 18 kg. iSoFiX class B1
restraint system.
8. Under no circumstances should the safety seat be
installed in the front seat of the car opposite the
direction of travel if the car is equipped with an
active airbag.
9. Please never use the safety seat without its cover
or without the harness protectors.
10. Fastening a child dressed in outerwear could
reduce the efficiency of the restraint system.
11. Make sure to protect the child safety seat from
direct sunlight as it could heat up and hurt the
child.
12. Child seats or harness accessories that are
damaged or have been used incorrectly must be
replaced.
13. Do not leave heavy objects inside the car, as these
may injure the child in the event of an accident.
14. Make sure that the buckle is correctly fastened
so that the child can be quickly freed in case of
emergency.
15.The safety seat's rigid and plastic elements should
be positioned and installed so that they cannot
be trapped by a moving seat or a door during
everyday use of the vehicle.v
16. Do not disassemble, modify, or add any piece to
the child seat or harness, as this would seriously
affect its basic functioning and the safety that the
child seat provides.
17. The safety seat must remain installed in the
vehicle with the safety belt, even if the child is not
seated in the child seat. The child must never be
left unattended while seated in the safety seat,
not even outside the vehicle.
18. Keep the safety seat away from corrosive
products.
19. Do not use anchor points that are not listed in the
instruction manual and indicated on the seat.
20. The seat should be replaced after undergoing the
violent stresses associated with an accident.
21. The manufacturer guarantees the quality of
its products, but not the quality of second-
hand products or products belonging to other
companies.
22. instruction illustrations are for informational
purposes only. The child restraint system may
contain small differences compared to the
photographs or images in the instruction manual.
These variations do not affect its certification
under ECE Regulation R44/04.
1. OVERVIEW
(1)
Headrest
(+)
Side impact
(2)
Cushion
protection
system (SiPS)
(3)
Shoulder
protectors
(4)
Harness
(8)
Belt guide
buckle
(groups 2 and 3)
(5)
Harness
(9)
Shoulder
adjustment
straps
button
(6)
Harness
(10)
Base
adjustment belt
(7)
iSoFiX
adjuster
(15)
Metallic
(11)
Headrest
extensions
height adjuster
of headrest
adjuster
(12)
Top Tether
(20)
Harness height
(13)
Top Tether
adjuster arm
adjuster
(14)
Top Tether
safety clip
(17)
Harness belt
connector
(18)
iSoFiX
(16)
iSoFiX system
blocking arms
unlock button
(19)
Belt buckle
retention plate
37
Publicidad
Tabla de contenido
