Dust Collection - Bosch 1295D Instrucciones De Funcionamiento

MICROFILTER DUST CANISTER —The
integral dust extraction system collects
sanding dust in canister supplied with your
sander. For maximum efficiency, the dust
canister should be emptied frequently during
operation.
Your tool is equipped with
!
WARNING
a dust canister, empty it
frequently, after completion of sanding
and before storing the sander. Be
extremely careful of dust disposal, materials
in fine particle form may be explosive. Do not
throw sanding dust on an open fire.
Combustion from mixture of varnishes,
lacquers, polyurethane, oil or water with dust
particles can occur if there is a static
discharge, spark introduced in the box, or
excessive heat.
REMOVING AND INSTALLING
DUST CANISTER
To remove dust canister: squeeze release
tabs on both sides of canister and simply pull
away from the tool.
To install dust canister: align dust port with
hole in canister and push canister onto tool
until it locks into place.
CLEANING AND EMPTYING THE
DUST CANISTER
To empty canister, hold canister and
maintain a firm grip. Firmly push upward on
tab on corner of lid, and remove from
canister. Knock excess dust out of the
microfilter, or remove dust with your fingers
or a soft brush. You may notice that all the
dust may not come out of the canister. This
will not affect sanding performance but will
reduce dust collection efficiency.
NOTE: Do not wash the micro filter with soap
and water. Dust may become more firmly
lodged in the pores, which will reduce dust
collection, and damage the micro filter.

Dust Collection

RS006
When the canister is removed from the tool,
an (optional) vacuum hose accessory can be
attached to the dust port. To use this feature,
attach vacuum adapter(s) and vacuum hose
(optional accessories) to dust port, then
connect opposite end of the vacuum hose to
a shop vacuum cleaner.
-9-
BOSCH
19MM HOSE
VAC002
ATTACHING VACUUM HOSE
1-1/4"
OR
1-1/2"
HOSE