Safety Information; General Safety Rules; Work Area Safety; Electrical Safety - Husky H1504ST Guía De Uso Y Cuidado

Safety Information (continued)

GENERAL SAFETY RULES

WORK AREA SAFETY

1. Keep your work area clean and well lit. Cluttered benches
and dark areas invite accidents. The floor must not be
slippery from wax or dust.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases, or
dust. Power tools create sparks which may ignite dust or
fumes.
3. Keep bystanders, children, and visitors away while
operating tools. Distractions can cause you to lose control.
4. Operate the air compressor in an open area at least 18 in.
away from any wall or object that could restrict the flow of
fresh air to ventilation openings.

ELECTRICAL SAFETY

1. Avoid body contact with grounded surfaces such as pipes,
radiators, ranges, and refrigerators. There is an increased
risk of electric shock if your body is grounded.
2. Don't expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric
shock.
3. Do not abuse the cord. Never use the cord to carry the tool
or pull the plug from an outlet. Keep the cord away from
heat, oil, sharp edges, or moving parts. Replace damaged
cords immediately. Damaged cords increase the risk of
electric shock.
4. When operating a power tool outside, use an outdoor
extension cord marked "W-A" or "W". These cords are
rated for outdoor use and reduce the risk of electric
shock.
WARNING:
Read and understand all instructions. Failure to follow
all instructions listed below may result in electric shock,
fire, and/or serious personal injury.
WARNING:
To avoid serious personal injury, do not attempt to use
this product until you read thoroughly and understand
completely the operator's manual. Save this operator's
manual and review frequently for continuing safe
operation and instructing others who may use this
product.

PERSONAL SAFETY

1. Eye protection which conforms to ANSI specifications and
provides protection against flying particles both from the
FRONT and SIDE should ALWAYS be worn by the operator
and others in the work area when loading, operating, or
servicing this tool. Eye protection is required to guard
against flying fasteners and debris, which could cause
severe eye injury.
2. The employer and/or user must ensure that proper eye
protection is worn. We recommend a Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses
that provide protection against flying particles both from
the front and side. Always use eye protection which is
marked to comply with ANSI Z87.1.
3. Additional safety protection will be required in some
environments. For example, the working area may include
exposure to a noise level which can lead to hearing
damage. The employer and user must ensure that any
necessary hearing protection is provided and used by the
operator and others in the work area. Some environments
will require the use of head protection equipment. When
required, the employer and user must ensure that head
protection marked to comply with ANSI Z89.1 is used.
4. Stay alert, watch what you are doing, and use common
sense when operating a power tool. Do not use tools while
tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating
power tools may result in serious personal injury.
5. Dress properly. Do not wear loose clothing or jewelry.
Contain long hair. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewelry, or long
hair can be caught in moving parts.
3
Contact 1-888-43-HUSKY for further assistance.
HUSKYTOOLS.COM