Technical Data - Würth BLG 12-25 Workshop Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
Complaints can only be accepted if the device
is handed over assembled to a WÜRTH branch,
your WÜRTH sales representative or a WÜRTH-
authorised customer service centre.
Subject to technical change without notice.
We accept no liability for typographical errors.
DISPOSAL
Power tools, accessories and packaging
should be deposited at a recycling centre.
EU member states only: Do not dispose of
your power tool with domestic waste. In
accordance with EU Directive 2012/19/EU on
waste electrical and electronic equipment and the
legislation implementing it in national law, power
tools which are no longer serviceable must be
separated and deposited at a recycling centre.
ERROR
DESCRIPTION
Fault 1
Fault 2
■ ■
Fault 3
■ ■ ■
Fault 4
■ ■ ■ ■
Fault 6
■ ■ ■ ■ ■ ■
Fault 7
■ ■ ■ ■ ■ ■ ■
14
■■
■■
■■
■ ■
■■
■■
■ ■ ■
■■
■■
■ ■ ■ ■
■■
■■
■ ■ ■ ■ ■ ■
■■
■ ■ ■ ■ ■ ■ ■

TECHNICAL DATA

Item number
Mains voltage [VAC]
Temperature range [ºC]
Charging voltage* V1 [VDC]
Float V2 [VDC]
Max. current [A]
Max. recommended battery [Ah]
Protection class [IP]
230 V power cable
Charging cable incl. clip
Weight [kg]
Dimensions [mm] (L, W, H)
*Temperature compensation approx. 5.0 mV/°C/cell. Ref. 25°C.
CE CONFORMITY
WÜRTH confirms that the chargers satisfy the
necessary and relevant safety requirements of one
or more directives and standards.
POSSIBLE CAUSE
1. Battery not connected.
2. Battery voltage below 2 V.
3. Battery voltage above 17 V.
4. Battery connected with poles reversed.
1. Temperature in charger too high.
2. Battery temperature too high.
3. Faulty component in charger.
1. Short circuit in charging circuit in power
supply mode.
2. Battery connected with poles reversed in
power supply mode.
1. Battery is damaged.
2. Battery voltage falls below 12 V during
■■
post-charge analysis. Possibly due to high
parallel load from other consumers.
Voltage falls below 9 V during bulk charging
■■
due to excessive parallel load.
0510 955 750
230
-20 +50
14.4/14.7
13.6
25
500
20
2.5 m
3.0 m
2.2
202x98x53

Publicidad

Tabla de contenido
loading

Tabla de contenido