Technical Data - Würth ACCTIVA EASY Manual De Instrucciones

These symbols will also be found on the rating plate in addition to the safety symbols
Symbols on
rating plate

Technical data

Acctiva Easy 1206
Mains voltage [V AC]
Mains voltage tolerance
Mains frequency
Max. open circuit power consumption
Nominal output
Charging voltage [V DC] / Test voltage
Arithmetic charging current [A DC] at 230 V
R.M.S. current [Aeff. DC] *)
Battery capacity
EMV Class
Chargeable cells
On-time
Charging characteristic
Degree of protection **)
Operating temperature ***)
Storage temperature
Length of time before the safety cut-out trips:
*) R.M.S. current corresponds to the specifications for conventional battery chargers
**)
***) at higher temperatures a drop in performance may occur (derating)
The proper functioning of the charger is tested at 5-85% humidity
Component specification: Climate class B
Read manual before charging.
Avoid flames and sparks while charging.
Beware!
Explosive gases occur while charging.
Battery acid is caustic.
For use indoors.
Do not expose to rain.
Ensure good ventilation while charging
NOTE! For indoor use only, do not expose the charger to rain or snow
8
110 - 230 V
+/-15 %
50/60 Hz
1.5 W
48 W
12 V
4.0 A
6.0 A
3 -200 Ah
EN 61000-6-3 (Class B)
EN 61000-6-1
FCC 15 Class B
6
100 %
IUoU
IP30
-20°C to +50°C
-4° F to 122° F
-25°C to +80°C
-13° F to 176° F
56 h