Replacing Carbon Brushes; Optional Accessories - Makita BPB180 Manual De Instrucciones

Ocultar thumbs Ver también para BPB180:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Replacing tires on wheels
1
2
3
004750
When the blade slips or does not track properly because
of badly worn tires, or the lip of the tire on motor side
gets damaged, the tires should be replaced.

Replacing carbon brushes

001145
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
1
2
007154
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
1. Wheel
2. Tire
3. Lip
1. Limit mark
1
1. Screwdriver
2. Brush holder
cap

OPTIONAL ACCESSORIES

CAUTION:
These
accessories
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Band saw blades
Hex wrench 4
Cutting wax
Various type of Makita genuine batteries and
chargers
NOTE:
Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
8
or
attachments
Only use
accessory or
are

Publicidad

Tabla de contenido
loading

Tabla de contenido