Stapler Operation - Hitachi N 3804AB2 Instrucciones Y Manual De Seguridad

(3) Pull the staple feeder backward slightly, and
press in the lock button. Push the staple
feeder forward. Gently set the staple feeder
to the back of the loaded staples.
The Stapler is now ready to operate.
CAUTION:
If the staple feeder is released all of a sudden, it can return abruptly, causing deformation
and/or scatter, eventually ending up in clogged staples.
Be absolutely sure to bring back the staple feeder, avoiding any impact.

STAPLER OPERATION

Read section titled "SAFETY"(pages 4 – 8).
Never place your hands or feet closer than 8 inches (200 mm)
from firing head when using.
Do not drive staples on top of other staples or with Stapler at
too steep of an angle; staples can ricochet and hurt someone.
In order to avoid double fire or unwanted ejection of a staple
due to bouncing of the Stapler.
DANGER
Operators and others in work area MUST
wear safety glasses with side shields
which conforms
specifications.
WARNING
NEVER point tool at yourself or others in
work area.
Keep fingers AWAY from trigger when
not driving staples to avoid accidental
firing.
Choice of triggering method is important.
Please read and understand "METHODS
OF OPERATION" found below.
Lock Button
1
2
3
Staple Feeder
to ANSI Z87.1
English
17