Operation - Mettler Toledo LC-P43 Instrucciones De Manejo

LC-P43 balance

Operation

• Pressing the balance key with the
As long as the balance does not show a stable weight value, nothing will be printed out.
(With PR- and SR-balances, an automatic printout is also possible.)
• Pressing the printer key
Inserting paper
• Feed paper through the slot in the printing unit in the direction of the arrow.
• Switch on printer with toggle switch at the rear.
• Press and hold
Attaching printer, printing
• Attach data cable of the LC-P43 to the data interface of the balance.
The printer is now ready for operation!
• Pressing the balance key with the
(PR- and SR-balances: weight with time, date and sample number.)
symbol prints out the stable weight value.
advances the paper 1 line (line feed).
until sufficient paper has been fed in
symbol prints out the weight value.
5