Technical Specification - HQ-Power CLLS04 Manual Del Usuario

Damage caused by user modifications to the device is not covered by
the warranty.
Only use the device for its intended purpose. Using the device in an
•
unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is
•
not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
Overview
4.
Refer to the illustration on page 2 of this manual.
1 power switch
2 transformer
3 controller
Use
5.
Refer to the illustrations on page 2 of this manual.
• Fix the metal mounting clip in the desired location.
• Press the LED strip in the mounting bracket.
• Led strips [6] can be connected either to each other (series) or
directly to the distribution box [4]. When connecting to the
distribution box, use an included strip cable [5].
Note: to create different effects, consider purchasing connection
accessories as shown on page 3 (not included).
• Plug the power plug into a suitable mains outlet and switch the LED
strips on with the power switch [1].
• Press the button on the controller [3] until the desired lighting effect
is reached:
1x auto colour change
2x 7 colour slow flash
3x 7 colour quick flash
4x fixed colour red
5x fixed colour blue
Technical Specification
6.
input voltage
output
dimensions
26.04.2011
LED strip (4x)
connection cable (4x)
distribution box
controller
adaptor
CLLS04
4 distribution box
5 strip cable
6 LED strip
6x fixed green
7x mixed red + blue
8x mixed red + green
9x mixed blue + green
10x fixed white
220‐240Vac / 50Hz
12Vdc / 2A max. / 24W
250 (L) x 10 (W) x 8 (H) mm
2.50m
65 x 36 x 15mm
73 x 45 x 18mm
125 x 46 x 32mm
5 ©Velleman nv