Specifications - Stihl BGA 85 Manual De Instrucciones

English
Definitions
1. Battery Compartment
Accommodates the battery in the
unit.
2. Control Handle
The handle of the blower held by the
operator´s hand.
3. Trigger Switch Lockout
Must be depressed before the
trigger switch can be activated.
4. Trigger Switch
Switches the motor on and off and
controls the speed of the motor.
5. Retaining Latch
Locks or unlocks the trigger switch.
6. Blower Tube
Directs airstream.
7. Nozzle
Mounted on blower tube, directs
airstream.
8. Intake Screen
Fits over the intake opening and
reduces the risk of direct contact
with the axial fan, which is located
under the screen.
9. Battery Locking Tabs
Secure the battery in the unit.
10. Battery
Supplies the motor with electrical
power.
11. Light Emitting Diodes (LEDs) on
Battery
Indicate the state of charge and
operating condition of the battery.
20
12. Push Button
For activating light emitting diodes
(LED) on battery.
13. Charger
Charges the battery.
14. Light Emitting Diode (LED) on
Charger
Indicates charger operating mode
and certain problems.
15. Power Supply Cord
Supplies electric current to charger.

Specifications

Battery
Type: Lithium-Ion
The power tool can be operated with
STIHL type AP batteries.
Power tool running time depends on the
stored energy of the battery (e.g. 80 Wh
with AP 80 or 160 Wh with AP 160).
Charger
AL 100
Mains voltage: 120 V
Rated current: 1.3 A
Frequency: 60 Hz
Power consumption: 75 W
Charging current: 1.6 A
Insulation: II, E (double
insulated)
AL 300
Mains voltage: 120 V
Rated current: 4.7 A
Frequency: 60 Hz
Power consumption: 330 W
Charging current: 6.5 A
Insulation: II, E (double
insulated)
BGA 85