Switch Off; Normal Operation - HSM ProfiPack P425 Instrucciones De Servicio

KHD Handels-GmbH - www.khd-kl.com - www.khd-handel.de - Fon +49 (0) 631 570 46 80 - Autorisierter HSM-Direkthändler
english
6 Operation
Switching the system on
• Unlock the emergency stop button
by turning it anti-clockwise.
• Move the power switch at the right-
hand side to position "I".
 "Ready for operation" display flashes.
The "Ready for operation" display illumi-
nates constantly after a short period of time.
The machine is ready to operate.
Press the "Forward button".
The cutting unit starts up.
The operating speed can be controlled in
4 levels using the - and + adjustment buttons.
Changing the settings during operation is
possible.
Feed in cardboard
425 mm
• Cardboard is processed at a width of up to
425 mm.
• Wider cardboard is automatically trimmed.
• The cutting unit is switched off using
the stop button.
10

Switch off

Switch the mains switch on the right side to
position "0".

Normal operation

Flap up
Secure setting with butterfly nut on left
(finger-tight).
Padding
Flap in lower position
Secure setting with butterfly nut on left
(finger-tight).
ProfiPack P425
06/2018