HSM ProfiPack P425 Instrucciones De Servicio página 11

KHD Handels-GmbH - www.khd-kl.com - www.khd-handel.de - Fon +49 (0) 631 570 46 80 - Autorisierter HSM-Direkthändler
6 Operation
Adjustable limit stop
Lever up: For moving
Lever down: L imit stop fixed
7 Troubleshooting
Blockage
Press the "Reverse button" to remove mate-
rial in the event of problems.
T he cutting unit reverses slowly in ap-

prox. 10 sec and slides the cardboard
back.
Note
If a large quantity of cardboard has already
been pulled in before the blockage occurred,
you can also press the forward button.
This makes the cutting unit run forwards
slowly and shreds the remaining cardboard.
During this function, the "Ready for
operation" and "Blockage" indicators flash
alternately.
For all other malfunctions, check whether the
motor was overloaded before contacting our
customer service. Let the machine cool down
for approx. 15 – 20 mins. before restarting.
06/2018
8 Cleaning
Switch off the machine and disconnect the
power plug. When cleaning, only use a soft
cloth and a mild soap-water solution. How-
ever, no water must enter the equipment.
9 Disposal/Recycling
Dispose of the machine in an envi-
ronmentally sound way at the end
of its service life. Observe the
current regulations when doing
this. As legislation is subject to
ongoing changes, we request that
you contact your local authorities at the
appropriate time. As the manufacturer, HSM
would be glad to advise you on the disposal
of your old machine.
ProfiPack P425
english
11