Door Removal/Reversal Instructions - IKEA LAGAN Manual De Uso Y Cuidado

DOOR REMOVAL/
REVERSAL INSTRUCTIONS
Phillips™
Head
&
Flathead
Screwdriver
Door Closer
#2 Phillips
T20
Bottom
Hinge
Screw
NOTE
* We do not recommend to using an
electric tool to unscrew and screw
parts because it may damage the
screw threads or cause screw heads to
be stripped off. However, if chosen, the
torque cannot be larger than 6 N·m
(4.43 ft lbf).
NOTE
The direction in which your refrigerator
doors open (door swing) can be re-
versed, from left to right or right to
left, by moving the door hinges from
one side to the other. Reversing the
door swing should be performed by a
qualified person.
IMPORTANT
Before you begin, turn the refrigerator
temperature control to "OFF" and
remove the electrical power cord from
the wall outlet. Remove any food from
door shelves.
10
Socket
Wrench Set
Top Hinge
Screw
5/16"
(8mm)
T25
Center
Hinge
Screw
T20 & T25
Torx Head
Screwdriver
Putty
Knife
Door removal and
reversal instructions:
1. Unplug your refrigerator.
2. By hand, remove the top hinge
cover, lifting the back and pushing it
forward (see Figure 1A).
3. Using a 5/16 in. socket, loosen the 3
screws from the top hinge (approx.
⅜ in. – 9 mm) (see Figure 1B).
B
Figure 1
IMPORTANT
Place the door on padded surface to
avoid damage.
4. Carefully open the freezer door. Lift
the loosened the top hinge and lift
the door off of center hinge pin. Set
the door aside.
EN
Hammer
* Optional Tool:
* Hand held
Drill/Driver
A