Kenwood KDC-BT368U Manual De Instrucciones página 22

BLUETOOTH®
Settings to use an App
The App is designed to control the KENWOOD car receiver's
operations from the iPhone/iPod (via Bluetooth or via USB
input terminal) or Android smartphone (via Bluetooth).
• For more information, visit <www.kenwood.com/cs/ce/>.
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the
following table), then press the knob.
3 2
Repeat step until the desired item is selected or
activated.
4
Press and hold to exit.
To return to the previous setting item, press
REMOTE APP
SELECT IOS: Selects iPhone/iPod to use the App via Bluetooth or
connected via USB input terminal.
ANDROID: Selects Android smartphone to use the App via
Bluetooth.
ANDROID LIST*: Selects the Android smartphone to use from
the list.
STATUS Shows the status of the selected device.
IOS CONNECTED: You are able to use the App using the
iPhone/iPod connected via Bluetooth or USB input terminal.
IOS NOT CONNECTED: No IOS device is connected to use the
App.
ANDROID CONNECTED: You are able to use the App using the
Android smartphone connected via Bluetooth.
ANDROID NOT CONNECTED: No Android device is connected
to use the App.
* Displayed only when [SELECT] is set to [ANDROID].
18
ENGLISH
Listen to iPhone/iPod via Bluetooth
You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.
• Make sure the USB input terminal is not connected to any device.
Press repeatedly to select iPod or BT AUDIO.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB input
terminal ( 7).
Internet radio via Bluetooth
Listen to Pandora
You can listen to Pandora on the iPhone/iPod touch/Android device via Bluetooth
on this unit.
.
• Make sure the USB input terminal is not connected to any device.
Preparation:
Default: XX
Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 5)
1
Open the Pandora application on your device.
2
Connect your Bluetooth audio player via Bluetooth connection. ( 12)
3
Press
The source switches and broadcast starts automatically.
• You can operate Pandora in the same way as Pandora via USB input terminal. ( 10)
Listen to iHeartRadio
You can listen to iHeartRadio on the iPhone/iPod touch/Android device via
Bluetooth on this unit.
• Make sure the USB input terminal is not connected to any device.
Preparation:
Select [ON] for [IHEART SRC] in [SOURCE SELECT]. ( 5)
1
Open the iHeartAuto application on your device.
2
Connect your device via Bluetooth connection. ( 12)
3
Press
The source switches and broadcast starts automatically.
• You can operate iHeartRadio in the same way as iHeartRadio via USB input
terminal. ( 11)
repeatedly to select PANDORA.
repeatedly to select IHEARTRADIO.