Audio Settings - Kenwood KDC-BT368U Manual De Instrucciones

AUDIO SETTINGS

While listening to any source...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
(or using the remote control)
1 Press AUD to enter [AUDIO CONTROL].
Press J / K to select an item, then press
2
AUDIO CONTROL
SUB-W LEVEL LEVEL –50 to LEVEL +10 (LEVEL 0): Adjusts the subwoofer output
level.
MANUAL EQ The sound elements (frequency level, tone level, Q factor) are preset into
each selection (BAND1 LEVEL to BAND13 LEVEL).
BAND1 LEVEL
LEVEL LEVEL–9 to LEVEL +9 (LEVEL 0): Adjusts the level to memorize for
each source. (Before making an adjustment, select the source you want
to adjust.)
BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.
BAND2 LEVEL to LEVEL–9 to LEVEL +9 (LEVEL 0): Adjusts the level to memorize for
BAND13 LEVEL each source. (Before making an adjustment, select the source you want
to adjust.)
Q FACTOR 1.35/1.50/2.00: Adjust the quality factor.
PRESET EQ
BASS BOOST
LOUDNESS
.
SUBWOOFER SET
FADER
.
BALANCE
Default: XX
VOLUME OFFSET
SOUND EFFECT
SOUND RECNSTR
(Sound
reconstruction)
SPACE ENHANCE
SND REALIZER
STAGE EQ
DRIVE EQ
NATURAL/ROCK/POPS/EASY/TOP40/JAZZ/POWERFUL/USER:
Selects a preset equalizer suitable to the music genre. (Select [USER] to
use the settings made in [MANUAL EQ].)
LEVEL1/LEVEL2/LEVEL3/LEVEL4/LEVEL5: Selects your preferred bass
boost level. ; OFF: Cancels.
LEVEL1/LEVEL2: Selects your preferred low and high frequencies boost
to produce a well-balanced sound at a low volume level. ; OFF: Cancels.
ON: Turns on the subwoofer output. ; OFF: Cancels.
POSITION REAR 15 to POSITION FRONT15 (POSITION 0): Adjusts
the rear and front speaker output balance.
POSITION LEFT 15 to POSITION RIGHT15 (POSITION 0): Adjusts the
left and right speaker output balance.
LEVEL –15 to LEVEL +6 (LEVEL 0): Preset the initial volume level of
each source. (Before adjustment, select the source you want to adjust.)
(Not applicable for TUNER source and AUX source.)
ON: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression. ; OFF: Cancels.
(Not applicable for TUNER source.)
SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ;
OFF: Cancels.
LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more realistic. ;
OFF: Cancels.
LOW/MIDDLE/HIGH: Virtually adjust the sound position heard from
the speakers. ; OFF: Cancels.
ON: Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres. ; OFF: Cancels.
19
ENGLISH