Bluetooth - Kenwood KDC-BT368U Manual De Instrucciones

iHeartRadio®
Search and store a station
1 Press .
2 Turn the volume knob to select a category, then press the
knob.
Turn the volume knob (or press J / K on the remote
3
control) to select the desired station.
4 Press the volume knob (or press
control) to confirm.
When a city list appears, you can search cities in
alphabetical order by turning the volume knob quickly.
To cancel, press and hold
To store a station: Press and hold one of the number buttons
(3, 4 or 5).
To select a stored station: Press one of the number buttons
(3, 4 or 5).
12
ENGLISH
on the remote
.
BLUETOOTH®
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
Connect the microphone
Rear panel
Microphone
(supplied)
Microphone input
jack
Pair and connect a Bluetooth device for the first time
1
Press to turn on the unit.
2
Search and select this unit model name ("KDC-BT3
Bluetooth device.
"PAIRING" "PASS XXXXXX" Device name "PRESS" "VOLUME KNOB"
appears on the display.
• For some Bluetooth devices, you may need to enter the Personal Identification
Number (PIN) code immediately after searching.
3
Press the volume knob to start pairing.
"PAIRING OK" appears when pairing is completed.
Adjust the
microphone angle
Secure using cord clamps (not
supplied) if necessary.
U"/"KDC-BT3
**
") on the
*