Siemens VSX1 Instrucciones De Uso página 19

en
The exhaust filter may be ordered via our
After Sales Service.
Replacement part number: 642881
Cleaning the cylinder and joint
26
Figure
Use the release button to unlatch the cylinder.
The cylinder folds forward (see Fig. 17).
Turn the dust separator twist-lock cover
anticlockwise and remove it from the dust
separator.
Clean the cylinder and cylinder cover as
required.
27
Figure
Replace the dust separator twist-lock cover
and lock into position by turning in a
clockwise direction.
Push the cylinder back into position, closing
the vacuum cleaner (you will hear a positive
click) (see Fig. 23).
28
Figure
The cylinder can also be removed from the
vacuum cleaner to clean the joint in the event
of malfunctions caused by large objects being
vacuumed up.
When replacing the joint, you must hear it
engage.
CAUTION: The inside of the separator may
!
become scratched with use and start to
look opaque. This does not, however,
affect the performance of the vacuum
cleaner in any way, i.e. it will continue to
function as normal.
14
Care
Always switch off the vacuum cleaner and
disconnect the power cord from the mains
before cleaning the appliance. The vacuum
cleaner and plastic accessories can be cleaned
with a commercial plastic cleaner.
Do not use a scourer, glass-cleaning agent
!
or all-purpose cleaning product. Never
immerse the vacuum cleaner in water.
The dust compartment can, if necessary, be
cleaned with a second vacuum cleaner or
simply wiped with a dry cloth or dusting brush.
Subject to technical modifications.