Corghi SP 2300 Manual De Uso página 33

- Lift the roller until it juts out from the top
edge.
- Start rotation and take the tyre off. (fig. 19)
WDK
Fitting the tyres
- Place the tyre on the rim and tilt the column
forwards and fit the first bead (fig. 20).
- Position the top bead under the mounting/
demounting tool, simultaneously position the
bead depressor roller and the bead depressor
block near the mounting/demounting tool,
press the down lever until the rim pressing
SP 2300 - Operator's manual + spare parts
roller lowers to under the top edge of the rim
(fig. 21).
WDK
19
- Press the rotation pedal and mount the tyre
(fig.22).
WDK
20
You will notice that the rim pressing roller that
keeps the bead under the head of the mounting/
demounting tool and the bead depressor block
follow the wheel in its rotation, keeping the
bead inside the channel, thus guaranteeing
correct mounting without the operator having
to use his hands.
21
UK
22
33