Safety Standards; Transport, Storage And Handling; Machine Transporting Conditions And Technical Data; Machine Transporting And Storage Environmental Conditions - Corghi SP 2300 Manual De Uso

TRANSPORT, STORAGE
AND HANDLING
Machine transport conditions
and technical data
The upright kit and the SP 2300 must be
transported in their original packing and must
be kept in the same position as indicated on
the packing.
SP 2300
- maximum tyre diameter: .........................1080 mm
- rim diameter: ............................. min 10" - max 26"
- rim width: ..................................... min 4" - max 14"
- bead breaker cylinder force: ....... 9300 N a 10 bar
- operating pressure: .......................................10 bar
• Weight
- Column ............................................................ 18 kg
- Power unit ..................................................... 48 kg
- Mobile arm .................................................... 19 kg
- Universal rim pressing cone ........................ 1 kg
Ambient conditions for storage
and transport
Temperature range from -2° ÷ +55°C.
WARNING
Do not stack other goods on top of the packing
or damage may result.
ATTENTION
Keep the packing material intact for possible
future transport of the machine.
SP 2300 - Operator's manual + spare parts

SAFETY REGULATIONS

The equipment is intended for professional
use only.
WARNING
Only one operator may work on the equipment
at a time.
WARNING
Failure to observe these instructions and the
relative danger warnings can cause serious
injury to the operator and others. Do not po-
wer up the machine before you have read and
understood all the danger/warning/attention
notices in this manual.
This machine must be used only by qualified
and authorised personnel. A qualified opera-
tor is construed as a person who has read and
understood the manufacturer's instructions, is
suitably trained, and is conversant with safety and
adjustment procedures to be adhered to during
operations. Operators are expressly forbidden
from using the machine under the influence of
alcohol or drugs capable of affecting physical
and mental capacity.
The following conditions are essential:
- The operator must be able to read and under-
stand all the information in this manual.
- Make sure you have a thorough knowledge
of the capabilities and characteristics of this
machine.
- Keep unauthorised persons well clear of the
area of operations.
- Make sure that the machine has been installed
in compliance with established legislation and
standards.
- Make sure that all machine operators are suita-
ble trained, that they are capable of using the
machine correctly and that they are adequately
supervised during their work.
- Never leave nuts, bolts, tools or other
equipment on the machine to avoid the risk
that they could become entrapped between
moving parts during work.
- Do not touch power lines or the inside of electric
motors or other electrical equipment until the
power has been disconnected and locked out.
- Read this manual carefully and learn how to
use the machine correctly and safely.
- Always keep this user manual in a place where
it can be readily consulted when working with
UK
25