Rewind Starter; Storing The Machine; Inspections And Maintenance By Dealer - Stihl BT 130 Manual De Instrucciones

Ocultar thumbs Ver también para BT 130:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Rewind Starter

To help prolong the wear life of the
starter rope, observe the following
points:
Pull the starter rope only in the
N
direction specified.
Do not pull the rope over the edge of
N
the guide bushing.
Do not pull out the rope more than
N
specified.
Do not allow the starter grip to snap
N
back, guide it back into the housing
slowly – see chapter on "Starting /
Stopping the Engine."
Have a damaged starter rope replaced
by your dealer before it breaks
completely. STIHL recommends that
you have servicing and repair work
carried out exclusively by an authorized
STIHL servicing dealer.
BT 130

Storing the Machine

For periods of 3 months or longer
Remove the drilling tool.
N
Drain and clean the fuel tank in a
N
well ventilated area.
Dispose of fuel properly in
N
accordance with local
environmental requirements.
Run the engine until the carburetor
N
is dry – this helps prevent the
carburetor diaphragms sticking
together.
Thoroughly clean the machine – pay
N
special attention to the cylinder fins
and air filter.
Store the machine in a dry, high or
N
locked location, out of the reach of
children and other unauthorized
persons.
Inspections and Maintenance
by Dealer
Maintenance work
STIHL recommends that maintenance
and repair work be carried out only by
authorized STIHL dealers.
Fuel pickup body in tank
Have the fuel pickup body in the fuel
N
tank changed once every year
Spark arrestor in muffler
If engine performance deteriorates,
N
have the spark arresting screen in
the muffler checked
English
21

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido