Description, Specifications And Standard Equipment Description; Specifications; Standard Equipment - RIDGID 535 Manual Del Usuario

535 Automatic Pipe and Bolt Threading Machine
Figure 1 – Locked Foot Switch
Description, Specifications and

Standard Equipment

Description
The RIDGID Model 535 Automatic Threading Machine
is an electric motor-driven machine which automatically
centers and chucks pipe, conduit and rod (bolt stock) and
rotates it while threading, cutting and reaming operations
are performed. Threading dies are mounted in self-open-
ing, quick-opening die heads or semi-automatic 816/817
die heads. An automatic oiling system is provided to flood
the work with thread cutting oil during threading operations.
Geared Threader can also be used with the Threading
Machine to thread larger diameter pipe.
The RIDGID Model 535 Automatic Threading Machine
can also be used as a power source for roll grooving
equipment. Designed to attach to the carriage rail of
the Threading Machine, the roll grooving equipment
forms standard roll grooves on a variety of pipe sizes and
materials.

Specifications

Threading Capacity .......Pipe
Bolt
Geared Threader:
Pipe 2
Chuck ............................Automatic Centering
Rear Centering Device....Automatic
Operating Speed ............16, 46, 58 RPM
Motor:
Type ............................Induction
Horsepower.................2 HP
Volts ............................120V Single Phase AC, 60 Hz
Amps...........................18 Amps
Controls .........................Rotary Type FOR/OFF/REV
Switch & ON/OFF Foot Switch
Pump .............................Gerotor-Type
4
/ " through 2"
1
8
1 / " through 2"
4
/ " through 4"
1
2
Ridge Tool Company
Cutter.............................No. 820 - Roll-Type Cut-Off,
Self-Centering, Full Floating,
Pipe –
Bolt –
Reamer..........................No. 341 - Positive-Locking,
5-Flute Cone, Right Hand,
1 /
Weight............................350 lbs.
Standard Equipment
Model No. 535 Automatic Threading Machine with
Foot Switch
1 - No. 811-A Universal Quick-Opening Die Head (or
Models 816/817 Semi-automatic Die Heads)
1 - No. 341 Reamer
1 - No. 820 Cutter
1 - Set 1 / " - 3 / " Universal H.S. Dies
2 4
1 - Set 1" - 2" Universal H.S. Dies
1 - Gallon Stainless Steel Oil
4 - Hex Wrenches
1 - Spare E-1032 Cutter Wheel
1 - 4 oz. Can White Sealant with Teflon
Standard Machines
Catalog Model
No. No. 115V 25-60 Hz
84097 535 115V
Automatic w/811A Die Head
91142 535
Automatic
91332 535
Automatic w/816/817 Semi-automatic
Machines listed as / " - 2" include Standard Equipment. Machine
1
8
Only includes Standard Equipment less all Die Heads and Dies. All
machines have 60 Hz Induction 2 HP single-phase motors.
NOTE! NPT Dies are for NPT Die heads only. BSPT
Dies are for BSPT Die Heads only. Please use
Catalog Item Nos. when ordering. High-Speed
Dies are recommended for use with the 535
Automatic Threading Machine.
36
20 1 / "
2
36 1
Figure 2 – No. 535 Machine Dimensions
1 / " through 2",
8
1 / " through 1"
4
" through 2"
8
®
Description
RPM
1 / " -2" NPT 16, 46, 58
8
115V Machine 16, 46, 58
ONLY
1 / " - 2" NPT 16, 46, 58
2
Die Heads
1 / "
2
19 1 / "
4
/ "O.A.L.
2