Operating The Charger - Schumacher 88-1 Manual Del Usuario

RESETTING YOUR PASSWORD
1. In the log in screen, press Forgot Password. A password reset link will be sent to the email address you provided during registration.
2. Enter your new password.
3. Reenter the new password.
4. Click Reset Password to complete the process.

14. OPERATING THE CHARGER

USING THE CHARGER WITHOUT THE INTERNET
The charger itself is a stand-alone device and will function as a battery charger/maintainer without an internet connection. However, without an internet connection, the App will
not reflect the charging progress.
IMPORTANT: Do not start the vehicle with the charger connected to the AC outlet, or it may damage the charger and your vehicle.
WARNING: This charger is equipped with an auto-start feature. Current is supplied to the battery clamps before a battery is connected, and the clamps will spark if touched together.
NOTE: This charger is also a maintainer, and can be left on the battery of vehicles that are being stored.
USING THE QUICK-CONNECT CABLE CONNECTORS
Connect any of the three output cable assemblies to the charger in a matter of seconds.
IMPORTANT: Use the charger with only one connector at a time. Do not connect accessory cables together. This will cause reverse polarity and damage the charger and battery.
BATTERY CLAMP QUICK-CONNECT
Charging a Battery in the Vehicle
1. Turn off all the vehicle's accessories.
2. Do not close the hood, battery compartment, etc.
3. Clean the battery terminals.
4. Place the charger on a dry, non-flammable surface, or use the convenient hook attachment to hang the unit safely outside the work area.
5. Lay the AC/DC cables away from any fan blades, belts, pulleys and other moving parts.
6. Connect the battery, following the precautions listed in sections 6 and 7.
7. Connect the charger to a live grounded 120V AC outlet.
8. The blue Connected LED will light, indicating that the charger is connected to a wireless network.
9. When charging starts, the green LED will be solid, and the display will scroll "CHARGING" while the charger determines that the battery is properly connected, the
condition of the battery, and whether the battery is 6V or 12V.
10. Monitor the progress of the charge by pressing the display button on the front of the unit. When the battery is fully charged, the green LED will pulse.
11. When charging is complete, disconnect the charger from the AC power, remove the clamp from the vehicle's chassis, and then remove the clamp from the battery terminal.
Charging a Battery Outside of the Vehicle
1. Place battery in a well-ventilated area.
2. Clean the battery terminals.
3. Connect the battery, following the precautions listed in sections 6 and 7.
4. Connect the charger to a live grounded 120V AC outlet.
5. The blue Connected LED will light, indicating that the charger is connected to a wireless network.
6. When the charger starts, the green LED will be solid, and the display will scroll "CHARGING" while the charger determines if the battery is properly connected, the
condition of the battery, and whether the battery is 6V or 12V.
7. Monitor the progress of the charge by pressing the display button on the front of the unit. When the battery is fully charged, the green LED will pulse.
8. When charging is complete, disconnect the charger from the AC power, disconnect the negative clamp, and finally the positive clamp.
RING TERMINAL QUICK-CONNECT
The ring connectors permanently attach to the battery, providing easy access to quickly connect the charger to your battery. This application is appropriate for motorcycles,
lawn tractors, ATVs and snowmobiles.
1. To permanently attach to a battery, loosen and remove each nut from the bolt at the battery terminal.
IMPORTANT: Loss of vehicle settings can occur. Check vehicle owners manual for specific information.
2. Connect the red POSITIVE connector ring to the POSITIVE battery terminal.
3. Connect the black NEGATIVE connector ring to the NEGATIVE battery terminal.
4. Replace and tighten the nuts to secure.
5. Connect the cable to the end of the charger output cord. Take care to keep the wires and plug away from metal and moving parts.
6. Plug the charger power cord into a live grounded 120V AC outlet.
12V ACCESSORY PLUG QUICK-CONNECT
Charge or maintain your battery without lifting the hood. NOTE: The charger itself must be disconnected when the vehicle is in use.
1. Connect the end of the 12V accessory plug quick-connect to the charger.
2. Insert the 12V accessory plug into the 12V accessory outlet.
3. Route the power cord from the charger through the vehicle's open window.
4. Plug the charger power cord into a live grounded 120V AC outlet.
5. If the vehicle's ignition key has to be on in order for the accessory outlet to supply/receive power, turn the key without starting the engine. Consult your vehicle owners
manual for instructions on how to make the 12V outlet live without drawing excessive power.
• 8 •