Selecting The Input Signal; Automatically Sizing And Centering The Picture - IBM P96 Manual De Instrucciones

Selecting the Input Signal

You can connect two computers to this monitor using the
video input 1 and video input 2 connectors. To select one of
the two computers, use the Input 1-2 switch.
Move the Input 1-2 switch.
The selected connector appears on the screen for 3 seconds.
1• •2
"INPUT 1" (video input 1 connector) or "INPUT 2" (video
input 2 connector) appears on the screen.
N o t e
If no signal is input to the selected connector, NO INPUT SIGNAL
appears on the screen. After a few seconds, the monitor enters the
power saving mode. If this happens, switch to the other connector.
Automatically Sizing and
Centering the Picture
You can easily adjust the picture to fill the screen by
pressing the (auto sizing and centering) button.
Press the button.
The picture automatically fills the screen.
Notes
• This function is intended for use with a computer that provides
a full-screen picture. It may not work properly if the background
color is dark or if the input picture does not fill the screen to the
edges.
• Pictures with an aspect ratio of 5:4 (resolution: 1280 × 1024) are
displayed at their actual resolution and do not fill the screen to
the edges.
• The displayed image moves for a few seconds when the
button is pressed. This is not a malfunction.
Getting Started
Getting Started
EN
F
ES
C
5