Resetting The Adjustments; Resetting All Of The Adjustment Data For The Current Input Signal; Resetting All Of The Adjustment Data For All Input Signals - IBM P96 Manual De Instrucciones

Resetting the Adjustments

Resetting an adjustment item
1
Press the and ./>buttons to select the OSD
containing the item you want to reset, and press the
button again.
2
Press the ./> buttons to select the item you want to
reset.
3
Press the ? (reset) button.
Resetting all of the adjustment data for
the current input signal
When there is no OSD displayed, press the ? (reset)
button.
All of the adjustment data for the current input signal is
reset to the factory settings.
Note that resetting the current signal does not affect
brightness and contrast, OSD language, OSD position or
control lock.
Resetting all of the adjustment data for all
input signals
Press and hold the ? (reset) button for more than two
seconds.
All of the adjustment data, including the brightness and
contrast, is reset to the factory settings.
Note
The ? (reset) button does not function when
LOCK) is set to ON.
(CONTROL
Getting Started Customizing Your Monitor
Customizing Your Monitor
EN
F
ES
C
15