Right Side; Left Side; Saw Operations; Switch Activation - Bosch GCM12SD Instrucciones De Funcionamiento Y Seguridad

2610051827 GCM12SD 08-18.qxp_GCM12SD 9/19/18 2:52 PM Page 37
9.5"

Right Side

7"
2-5/8"
2"

Switch Activation

For safety, the switch lever is designed to pre-
vent accidental starts. To operate safety switch,
slide the switch "Lock-OFF" release button with
either thumb to disengage the lock, then pull
the power switch trigger and release the switch
"Lock-OFF" release button (figure 39). When
the power switch trigger is released, the switch
"Lock-OFF" release button will engage the
power switch trigger automatically, and the
lever will no longer operate until either "Lock-
Off" release button is engaged again.
NOTE: Power switch trigger can accommodate
a padlock with a long shackle of up to 5/16" in
diameter (not provided with miter saw) to pre-
vent unauthorized use.
Preparing for Saw Operations
7"
SLIDE CUT
NOTCH OUT
2-1/2"
26"
Fig. 38 Tall Auxiliary Wood Fence - 3/4" Thick

Saw Operations

4 Mounting Holes

Left Side

2-5/8"
Switch "Lock-OFF"
Release Buttons
Fig. 39
Padlock
Hole
5-1/2"
7"
2"
Power Switch
Lever
37