JVC KD-ADV5490 Manual De Instrucciones página 41

Symptom
• "NO CH" appears on the display for about
5 seconds, then returns to the previous
display while listening to the SIRIUS Satellite
radio.
• "NO (information)*" scrolls on the display
while listening to the SIRIUS Satellite radio.
• "---" appears on the display while listening to
the XM Satellite radio.
• "---" appears on the display for about
2 seconds, then returns to the previous
channel while listening to the XM Satellite
radio.
• "OFF AIR" appears on the display while
listening to the XM Satellite radio.
• "LOADING" appears on the display while
listening to the XM Satellite radio.
• "RESET 8" appears on the display.
• Satellite radio does not work at all.
• The iPod does not turn on or does not work.
• The sound is distorted.
• "NO IPOD" appears on the display.
• Playback stops.
• No sound can be heard when connecting an
iPod nano.
• "NO FILES" appears on the display.
• "RESET 1" – "RESET 7" appears on the display. Disconnect the adapter from both this unit and iPod.
• "RESET 8" appears on the display.
• The iPod's controls do not work after
disconnecting from this unit.
Remedy/Cause
No broadcast on the selected channel.
Select another channel or continue listening to the
previous channel.
No text information for the selected channel.
Selected channel is no longer available or is
unauthorized.
Select another channel or continue listening to the
previous channel.
Selected channel is not broadcasting at this time.
Select another channel or continue listening to the
previous channel.
The unit is loading the channel information and audio.
Text information are temporarily unavailable.
Reconnect this unit and the satellite radio correctly and
reset this unit.
• Check the connecting cable and its connection.
• Charge the battery.
• Update the firmware version.
Deactivate the equalizer either on this unit or the iPod.
• Check the connecting cable and its connection.
• Charge the battery.
The headphones are disconnected during playback.
Restart the playback operation (see page 25).
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
No tracks are stored. Import tracks to the iPod.
Then, connect it again.
Check the connection between the adapter and this
unit.
Reset the iPod.
REFERENCES 41