Tuner; Set Receivable Channels - JVC HR-J7005UM Manual De Instrucciones

10
EN

Tuner

Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
1
INFORMATION
The VCR detects the band (TV or CATV) and selects the
correct band automatically during Auto Channel Set.
The selected band will be displayed on the right side of
"BAND" on the Tuner Set screen.
POWER
1 2 3
2
4 5 6
8 9
7
0
4
CH+/–
OK
INITIAL SETTINGS (cont.)

Set Receivable Channels

TURN ON THE VCR
1
Press POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS TUNER SET
SCREEN
3
Move the highlight bar
(arrow) to "TUNER SET" by
pressing CH 5 ∞ or % fi,
then press OK or
PERFORM AUTO CHANNEL
SET
4
Move the highlight bar
(arrow) to "AUTO
CHANNEL SET" by
pressing CH5 ∞ or % fi ,
then press OK or
Receivable channels in
your area are
automatically assigned to
the CH 5 ∞ (+/–) buttons,
and non-receivable
channels are skipped.
NOTES:
At the end of Auto
Channel Set, "SCAN
COMPLETED" appears
on screen.
If the scan was unsuccessful, "SCAN COMPLETED–
NO SIGNAL" appears on screen. Check the
connections and start again.
RETURN TO NORMAL
SCREEN
5
Press MENU.
MAIN MENU
FUNCTION SET
= TUNER SET
.
INITIAL SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
TUNER SET
BAND
=AUTO CHANNEL SET
MANUAL CHANNEL SET
.
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END
CATV