Publicidad
Idiomas disponibles
Idiomas disponibles
Step 12
Secure the locknut on the spindles with the wrench
provided. The upper and lower latch spindles must be
engaged in the latches.
Operation
Opening the gate:
1. Press the upper latch button downward with thumb.
2. Lift the latch spindle out of the cup.
3. Push or pull the gate open.
Closing the gate:
1. Manually swing the gate closed.
2. Ensure both the upper and lower latch spindles are engaged
in their respective cups.
3. Verify to ensure the gate is securely in its locked position.
Removal and reinstallation
Simply remove the hinge screws that secure the top of the hinge
pin on both the upper and lower hinges. Insert a small bladed
screwdriver in the screw hole and gently pull upward to disengage
the hinge pins. Be sure to save the screws and hinge pins for
future use.
Note: When reinstalling the gate, be certain to reinstall the hinge
pins safely by following step 11.
CARE
CLEANING: Clean the safety gate using warm water and a mild detergent. Use a soft cloth or sponge to avoid
scratches. Never use solvents or chemicals to clean the safety gate.
Important Safety Cautions:
1. Do not use the product if any components are broken or missing. Do not use replacement parts other than
those approved by the manufacturer or distributor. Non-approved spare parts may render the repair or the
product unsafe.
2. Check regularly that all fittings and components are secure and that no components are worn, broken or
missing.
3. Check regularly that all fittings are securely tightened and that the locking mechanism is working properly.
Rev 03/2017
Distributed exclusively in the United States by
North States Industries, Inc.
5455 Highway 169 N
Plymouth, MN 55442
www.northstatesind.com
Manufactured in Guang Dong, China
Page 5
Publicidad
