28
CARE AND CLEANING
After Cleaning the Burner Heads/Caps
Shake out any excess water and then let them dry thoroughly. Placing the oval burner up-side down will allow the water to drain
out more easily. Replace the burner heads and caps over the electrodes on the cooktop, in the correct locations according to
their size. Make sure the hole in the burner head is positioned over the electrode.
Burner Grates
The range consists of three separate professional-style grates. For maximum stability, these grates should only be used when in
their proper position. The two side grates can be interchanged from left to right and front to back. The center grate can be
interchanged from front to back.
LRG3081 / LRG3091
NOTE
Do not operate a burner for an extended period of time without cookware on the grate. The finish on the grate may chip
without cookware to absorb the heat.
Cleaning the Burner Grates
Do not lift the grates out until they have cooled.
Grates should be washed regularly and after spillovers.
Wash the grates in hot, soapy water and rinse with
clean water.
The grates are dishwasher safe.
After cleaning the grates, let them dry completely and
securely position them over the burners.
CAUTION
DO NOT put the grate in the oven during self cleaning
mode.
Cooktop Surface
To avoid burns, do not clean the cooktop surface until it has
cooled. Foods with high acid or sugar content could cause a dull
spot if allowed to set. Wash and rinse when the surface has
cooled. For other spills such as oil/grease spattering, etc., wash
with soap and water when the surface has cooled. Then rinse
and polish with a dry cloth.
LRG3021
NOTE
Do not lift the cooktop surface. Lifting the cooktop
surface can lead to damage and improper operation of the
range.
Stainless Steel Surfaces
To inquire about purchasing stainless steel appliance cleaner
or polish, or to find the location of a dealer nearest you, please
call our toll-free customer service number:
1-800-243-0000 (U,S) or Visit our website at: www.lg.com,
for panama please call 507-260-0000.
NOTE
Do not use a steel wool pad; it will scratch the surface.
To clean the stainless steel surface, use warm sudsy
water or a stainless steel cleaner or polish.
Always wipe in the direction of the metal surface finish.