Color Lights; Label Auxiliary Functions; Temp Calibrate - Zodiac AquaLink Z4 Serie Manual De Instalación

ENGLISH
Page 18
7.6

Color Lights

INSTALL SETTINGS > COLOR LIGHTS
NOTE You will only see this option if colored lights are
installed in your system.
Select type of light installed (e.g., Jandy Colors
Jandy LED Light ) and assign the light to an available
®
auxiliary relay.
Select Light Type:
INSTALL SETTINGS
Color Lights >
Label Aux >

Temp Calibrate

>
Solar Priority >
Assign JVA >
>
More
Assign Selected Light to an Auxiliary:
SELECT LIGHT
SELECT LIGHT
Jandy Color
Jandy Color
Jandy LED
Jandy LED
• JC is displayed next to AUX if a Jandy Colors light
has been assigned.
• JL is displayed next to AUX if a Jandy LED Light
has been assigned.
• Press Select button with JC or JL highlighted to
toggle control by the auxiliary on or off.
AquaLink Z4 Controller | Installation Manual
®
or
TM
SELECT LIGHT
Jandy Color
Jandy LED
ASSIGN TO AUX
ASSIGN TO AUX
Jandy Color
Jandy Color
Aux1 JC
Aux1 JC
Aux2
Aux2
Aux3
Aux3
7.7

Label Auxiliary Functions

INSTALL SETTINGS>LABEL AUX
Assign labels to auxiliary equipment to display text in
the user interface instead of AUX 1, 2, or 3.
INSTALL SETTINGS
INSTALL SETTINGS
INSTALL SETTINGS
INSTALL SETTINGS
Color Lights >
Label Aux >
Color Lights >
Color Lights >
Color Lights >
Temp Calibrate >
Label Aux >
Label Aux >
Label Aux >
Solar Priority >
Temp Calibrate >
Temp Calibrate >
Temp Calibrate >
Assign JVA >
Solar Priority >
Solar Priority >
Solar Priority >
>
Assign JVA >
Assign JVA >
Assign JVA >
More
>
>
>
More
More
More
Label = Aux2
Label = Aux2
Label = Aux2
Label = Aux2
<Default>
Aerator
<Default>
<Default>
<Default>
Air Blower
Aerator
Aerator
Aerator
Backwash
Air Blower
Air Blower
Air Blower
Chlorinator
Backwash
Backwash
Backwash
Chlorinator
A-Z
Chlorinator
Chlorinator
More
More
More
More
• Choose from labels listed A-Z on each screen.
NOTE "SPILLOVER" assigns AUX to invoke
Spillover Mode only in AquaLink Z4 PS or PSi
configurations.
7.8 Temp Calibrate
INSTALL SETTINGS>TEMP CALIBRATE
Adjust temperature displayed on the AquaLink Z4 up or
down by 4 degrees.
NOTE If the temperature is off by more than four
(4) degrees, contact your local service
representative.
SYSTEM SETUP
SYSTEM SETUP
Label Aux >
Label Aux >
Temp Calibrate >
Temp Calibrate >
Solar Priority >
Solar Priority >
Assign JVA >
Assign JVA >
Color Light >
Color Light >
More
More
Back
Select
Back
Select
• Use Up/Down arrows to set new temperature value.
LABEL AUX
LABEL AUX
LABEL AUX
LABEL AUX
Aux1 >
Aux2 >
Aux1 >
Aux1 >
Aux1 >
Aux3 >
Aux2 >
Aux2 >
Aux2 >
Aux3 >
Aux3 >
Aux3 >
Label = Aux2
Label = Aux2
Label = Aux2
Label = Aux2
Swim Jet
Valve(s)
Swim Jet
Swim Jet
Swim Jet
Wtr Feature
Valve(s)
Valve(s)
Valve(s)
Waterfalls
Wtr Feature
Wtr Feature
Wtr Feature
Whirlpool
Waterfalls
Waterfalls
Waterfalls
Whirlpool
Whirlpool
Whirlpool
More
More
More
More
TEMPERATURE
TEMPERATURE
CALIBRATE
CALIBRATE
Water: 74°F
Water: 74°F
Back
Select
Back
Select