ENGLISH
Page 28
TIMEOUT MODE
TIME OUT mode is used by the pool service person
to aid them in servicing the pool. The AquaLink
interface will not be functional for three (3) hours,
or until the switch at the Controller is turned back to
AUTO mode. The time remaining for TIME OUT mode
is displayed on the user interface screen.
SPILLOVER DISABLED WHILE SPA IS ON
This message is displayed when the spa spillover is
pressed while in spa mode (water circulation is to spa).
The spillover requires that water circulation is to pool
in order to operate. The spillover will activate when the
system switches back to pool mode.
Zodiac Pool Systems, Inc.
2620 Commerce Way, Vista, CA 92081
1.800.822.7933 | www.ZodiacPoolSystems.com
ZODIAC
®
is a registered trademark of Zodiac International, S.A.S.U., used under license.
All trademarks referenced herein are the property of their respective owners.
©2012 Zodiac Pool Systems, Inc. H0386500 1210
AquaLink
Z4 Controller | Installation Manual
®
user
®