HQ-Power PROMIX400SF2 Manual Del Usuario página 4

3. DJ CHANNEL LEVEL CONTROL
Individual input control in order to obtain the desired volume level.
4. CROSSFADER
Linear slide switch used for mixing channels 1 to 4.
5. INPUT SELECTORS
Choose between the stereo PH/line and mono/stereo inputs.
6. L/R EQUALIZER
7. CHANNEL LEVEL CONTROLS
Individual input volume control for each channel.
8. ASSIGN SWITCH
Allows assignation of channels 1 ~ 4.
9. CUE
Cue switch for channels 1 ~ 4.
10. OUTPUT MASTER/ZONE LEVEL
Adjustment sliders for the master output signal level.
11. GAIN CONTROL
Input signal level adjustment control. Useful for harmonizing all input levels.
12. BALANCE OUTPUT CONTROL
13. POWER SWITCH
14. EQ ON/OFF SWITCH
15. HEADPHONES JACK
16. GOOSNECK LIGHT INPUT
17. PHONE MIX SLIDER
Allows mixing the headphones from the selected cue channel and the master output.
18. TALKOVER SWITCH
Switch to ON to cut the input levels with 12 dB, except for the DJ MIC channel.
19. VU METERS
Left and right master level indication.
20. FREQUENCY KILLING SWITCHES
21. ECHO ON/OFF SWITCH
22. ECHO LEVEL CONTROL
23. REPEAT LEVEL CONTROL
Varies the number of repeats of the echo effect.
24. DELAY TIME CONTROL
Varies the length between the original signal and the repeated signal.
25. EFFECT ON/OFF SWITCH
26. HEADPHONES LEVEL CONTROL
27. SOUND EFFECT LEVEL CONTROL
28. SOUND EFFECT
Choice of 8 different sound effects.
29. -
30. -
31. INPUT CONNECTOR
RCA connection to PH1/line 1.
32. INPUT CONNECTOR
RCA connection to line 2.
33. INPUT CONNECTOR
RCA connection to PH2/Line 3.
34. INPUT CONNECTOR
RCA connection to line 4.
35. INPUT CONNECTOR
RCA connection to line 5.
Error! Unknown document property name. (22/07/2008)
PROMIX400SF2
4
HQPOWER