My Preset State Menu; About T-5000 Menu; Sheath Fault Locating (Sfl) Optional Accessory A-5000 - Amprobe AT-5000 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 172
Push
Select to activate the desired setting. The transmitter automatically returns to the operational display screen.

My Preset State Menu

The T-5000 My Preset State allows the operator to return the transmitter's operational conditions to the configured and saved
preset state by selecting – No or yes.
The My Preset State feature is configured using the three-button navigational keypad.
Push the left/right arrows to select the desired setting.
Push Select to activate the desired setting. The transmitter automatically returns to the operational display screen.

About T-5000 Menu

The About T-5000 menu allows the operator to view the transmitter's serial number, hardware, and firmware information.
Push Menu to return to the previous screen.

Sheath fault Locating (SfL) optional Accessory A-5000

The Sheath Fault Locating (SFL) feature is available in Direct (Conductive) Connection mode only.
Push the SFL button,
Frequency selection is not configurable through the frequency menu screen.
Frequency selection: 9.82 kHz or 82 kHz, is activated by pressing the frequency button,
The active frequency is displayed on the operational display screen.
, to activate operation.
15
.

Publicidad

Tabla de contenido
loading

Tabla de contenido