Mode Menu - Amprobe AT-5000 Manual De Uso

Mode Menu

Two locate modes are available: Line and Sonde
• Push the 4-way navigation button (up/Down/Left/Right) to highlight the Mode menu.
• Push the Select button to open the Mode menu
• Push the 4-way navigation button (Up or Down) to highlight a desired locate mode.
• Push Select button to activate the desired locate mode
• Push Back to return to the previous menu interface
1. Line Locate
Line locate is used to trace the cable using the T-5000 signal transmitter
2. Sonde Locate
Sonde Locate is used to trace the cable using the M-5000 sonde transmitter. The R-5000 receiver automatically adjusts
its depth calculation algorithms to reflect the differences between a line radiating a transmitter signal and the signal
generated by a sonde transmitter.
19